Outdoor

Our company's heavy-duty MAΚEDONIA professional beach lounger in WALNUT color is a modern and luxurious proposition for the beach. It rests on 4 very low legs at the 4 corners and has perimeter "aprons". The extra characteristic feature of this sun lounger is the extra wide arms that it has, which give it a sense of luxury and comfort. The recline “stepper” has 5 reclining positions and combined with its large dimensions, it offers everything you want from a luxury beach lounger.

DIMENSIONS:
200x92x23.5-73H cm.
Arm height: 36 cm.
Leg height: 3 cm.
Recline “stepper” specifications: stainless steel metal bar Φ10, which locks into recessed positions in the frame.

CONSTRUCTION MATERIALS:
The entire beach lounger is made of water-based pine wood with impregnation. Pine is a soft, white, or pale-yellow wood that is light in weight with straight grain. It resists shrinkage, swelling and bending. Impregnation in the broadest sense is the coloring of wood (usually varnishes) by the dipping method.

MAINTENANCE:
The key to keeping your sunbed looking like new for many years is regular cleaning with a damp cloth to remove the saltiness.

** The color rendering of the product may differ slightly from its photographic representation on your screen.

Made in Greece—Made upon request

The GREGG bar stool is exactly what you want! Modern, comfortable, and stable! The two-tone sand grain WHITE frame with sand BEIGE synthetic RATTAN upholstery on the back and seat is unique. The arms make this stool attractive for any type of use, while its clean design lines will aesthetically upgrade the space you will place it in and draw attention. Also, the fact that it is STACKABLE makes it particularly practical since you can store it in the smallest possible space.

DIMENSIONS:
55x57x106H cm.
Seat dimensions: 40x43 cm.
Seat height: 70 cm.
Height of arms: 89 cm.
Back dimensions: 46x21-40 cm.
Leg distance: 54x59.5 cm.
Leg height: 66 cm.
Aluminum frame: Φ28-19 x 1.8mm leg tube---30x18x1.2mm seat tube
Support tube: Φ25x1.2mm

CONSTRUCTION MATERIALS:
The frame of the stool is made of powder coated aluminum. Aluminum is a "green" material that can be recycled indefinitely, maintaining its characteristics without any quality degradation.

The stool is upholstered with polyester (synthetic) RATTAN. In most garden furniture and outdoor furniture in general, PVC synthetic material is used, i.e., high-quality man-made fibers. This gives the construction exceptional strength and durability in extreme heat or cold conditions.

MAINTENANCE:
Thanks to the durability of both aluminum and polyester RATTAN, the maintenance of the stool is easy. In addition to regular dusting, you can wipe it with a damp cloth. We do NOT use detergents, bleaches, and polishes. If, nevertheless, the use of detergent is necessary, then we use mild soap with warm water. We do NOT use a pressure machine or hose with pressure because it will damage the fibers.

WHAT WE LIKE:
• Sturdy construction
• Modern design
• Aesthetic superiority with RATTAN and the WHITE aluminum
• Ease of maintenance
• STACKABLE
• Amazing value for money

** The color rendering of the product may differ slightly from its photographic representation on your screen.

The TRILAN aluminum armchair is simple and beautiful. The striking two-tone color of the frame in ANTHRACITE color, with synthetic RATTAN upholstery in NATURAL color on the seat and back, is unique. This armchair will aesthetically upgrade the space you will place it in and will catch the eye thanks to its construction materials. Also, the fact that it is STACKABLE makes it particularly practical since you can store it in the smallest possible space.

DIMENSIONS:
57x59x85H cm.
Seat height: 45 cm.
Height of arms: 66 cm.
Seat dimensions: 39x49 cm.
Back dimensions: 47x28-45 cm.
Leg distance: 49x51 cm.
Aluminum specifications: 28x1.5mm

CONSTRUCTION MATERIALS:
The frame of the armchair is made of powder coated aluminum. Aluminum is a "green" material that can be recycled indefinitely, maintaining its characteristics without any quality degradation. Aluminum naturally forms a thin oxide layer on the surface in contact with air, which provides very good corrosion protection.

Info: Powder coating is a dry coating process used as a metal finish mostly on industrial equipment. Powder coating is applied as dry powder through an electrostatic process, then cured with heat. It is well known for providing high-quality finishes in terms of both functionality and overall look.

The armchair is upholstered with polyester RATTAN in twisted form, which looks like rope.

MAINTENANCE:
Thanks to the durability of both aluminum and polyester RATTAN, the maintenance of the armchair is easy. In addition to regular dusting, you can wipe it with a damp cloth. We do NOT use detergents, bleaches, and polishes. If, nevertheless, the use of detergent is necessary, then we use mild soap with warm water. We do NOT use a pressure machine or hose with pressure because it will damage the fibers.

ADVANTAGES:
•Sturdy construction
•Modern design
•Ease of maintenance
•Stackable
•Amazing value for money

** The color rendering of the product may differ slightly from its photographic representation on your screen.

Features & Dimensions:

• Overall dimensions: 59 × 54 × 83 cm

• Seat dimensions: 40 × 48 cm

• Backrest dimensions: 48 × 20 cm

• Seat height: 48 cm

• Armrest height: 68 cm

• Distance between legs: 54 × 53 cm

Material:

• Frame made from high-quality solid teak wood

Maintenance: Dust regularly and clean with a damp cloth when necessary.

The RABIA professional beach sunbed in CHAMPAGNE color is the classic and timeless piece for the beach. It has proven its usefulness and functionality for many years. It is made of aluminum and textilene in CHAMPAGNE color. The recline “stepper” has got 5 levels (including the flat position). The matching headrest completes the look of this beautiful sunbed.

**PLEASE NOTE: The sunbed is K/D and requires assembly

DIMENSIONS:
191.5x60x31-89.5H cm.
Seat height: 31 cm.
Leg height: 27.5 cm.
Leg distance: 149.5-160.5x51-56 cm.
Aluminum frame: 50x25x1.2 mm

CONSTRUCTION MATERIALS:
The screws used in the construction of this deckchair are stainless steel.

The sunbed frame is made entirely of aluminum.
Info: Aluminum is a "green" material that can be recycled indefinitely, maintaining its characteristics without any quality degradation. Aluminum naturally forms a thin oxide layer on the surface in contact with air, which provides very good corrosion protection, even in corrosive environments. This layer can be further strengthened by surface treatment such as electrostatic painting.

The lining of the sunbed has been made with waterproof reinforced textilene fabric (2X1- 600gr). This is a thick, strong, and durable polyester fabric. It means that it is made of polyester threads coated with PVC.

The stairs are made of primary plastic.

MAINTENANCE:
Thanks to the extremely durable construction materials, it is ideal to use a very soft cloth or sponge, plenty of water and a mild cleaning product such as dishwashing detergent. They do not require special maintenance since they do not corrode. Soap and water are enough to keep them clean and shiny.

AT A GLANCE:
•Stackable to save space during storage
•Lightweight thanks to the aluminum construction
•Stainless steel construction
•Anatomical
•Minimal maintenance on both the frame and the fabric
•Heat bonded fabric for greater durability

** The color rendering of the product may differ slightly from its photographic representation on your screen.

The MILOS professional beach lounger in NATURAL wood color is a modern and luxurious proposition for the beach. Its wooden construction makes it incredibly durable and sturdy, and the GREY textilene 2x1 and 550gr/m2, with foam filling inside 3cm, matches the frame beautifully. The recline “stepper” has 4 reclining positions (+1 flat) and combined with its large dimensions, offers everything you want from a luxury beach lounger.

DIMENSIONS:
204x65x31,5-92,5H cm.
Leg height: 22.5 cm.
Leg distance: 152-165x60,5-66 cm.

CONSTRUCTION MATERIALS:
The entire deckchair is made of beech wood. Beech is a hard, strong, elastic, and heavy wood with tiny pores. This wood is elegant and has a reddish-brown color. It is mainly used to make furniture.
The cover of the cushion has been made with waterproof reinforced textilene fabric. This is a thick, strong, and durable polyester fabric. It means that it is made of polyester threads woven from edge to edge, and it is coated with PVC.

MAINTENANCE:
The key to keeping your deckchair looking like new for many years is regular cleaning with a damp cloth to remove the saltiness. If you want, you can use special varnishes that are on the market and protect the wood.

ADVANTAGES:
•Stackable to save space during storage
•Anatomical
•Thin cushion with foam material
•Luxurious construction
•Durable thanks to its wooden frame

Made in Greece
Made upon order

This shade fabric is a replacement for umbrellas HΜ6025.03. It is in BLACK color, and it is made of 250gr polyester water-repellent fabric. Polyester is a general term for any fabric that is made with polyester yarns or fibers and is essentially a type of plastic (acrylic). Polyester fibers are very strong and light. Polyester is very resistant to many chemicals, shrinking and stretching. It does not "wrinkle" and retains its original shape for a long time.
Its dimensions are 300x300cm.(square) and it is suitable for 8-beam umbrellas.

*CAUTION
Any return or withdrawal after the purchase of any fabric spare part regarding umbrellas, sunbeds, chairs or armchairs, sunshades, etc. will NOT be accepted.

** The color rendering of the product may differ slightly from its photographic representation on your screen.

Aluminum umbrella 3.5x3.5m.
Telescopic with enhanced ventilation, professional type with reinforced frame and 8+12 spokes.

Specifications:
Cloth: 300gr +PA COATING white with 30cm flaps and heat-sealing at the seams to waterproof.

Dimensions: 3.5x3.5m.
Umbrella height: 4m. when closed and 2.95 m. when it is open.
Umbrella body: Diameter φ60mm.X2.2mm thickness, one-piece, white, aluminum

Spokes:
8 main aluminum- dimensions 1.8x2.8 cm.X1mm thick, with internal iron tube reinforcement 2.4x1.4x40cm.
12 auxiliary metallic dimensions 1.4x2.4 cm x 1mm thick.


Suitable for professional spaces and not only.
The umbrella is suitable for use in clear weather. In unsettled weather the umbrella must be closed.

TAWNEE is a rectangular outdoor table with an aluminum frame in a cross-leg arrangement connected with a horizontal aluminum bar and it is in ANTHRACITE color. The tabletop is made of polywood plates in NATURAL wood color. It is a beautiful table in large dimensions, which can serve 8 people. You just find the chairs or armchairs that match and enjoy your beautiful moments.

DIMENSIONS:
219.5x89.5x73H cm.
Leg height: 68 cm.
Leg distance: 174.5-186.5x60-76.5 cm.

CONSTRUCTION MATERIALS:
The frame is made of powder coated aluminum. Aluminum is a metal with excellent mechanical properties, and it is very resistant to various forms of corrosion and requires minimal maintenance costs. Aluminum can also be recycled indefinitely, maintaining its characteristics without any quality degradation. Powder coating is a dry coating process used as a metal finish through an electrostatic process, then cured with heat. It’s suitable for both indoor and outdoor applications.
The tabletop is made of polywood. This is a form of plastic lumber that is environmentally friendly and requires little maintenance. Plastic lumber is 100% recyclable and at the same time, it is waterproof and resists all kinds of rot and mold.

MAINTENANCE:
You can wipe all surfaces with a damp cloth, and this is enough to make your furniture look like new again. For persistent stains you can use a mild cleaner. Avoid prolonged exposure of the table surface to the sun as well as its contact with toxic chemical products.

ADVANTAGES:
•Stable and secure construction
•Beautiful design
•Value for money

*The set is delivered unassembled, with detailed assembly instructions
**The exact color rendering of the product may vary slightly from the actual product due to different monitor settings.

The TAWNEE outdoor bench has an aluminum frame in WHITE color, with two cross bases joined by a horizontal wide bar. The seat surface is made of two polywood plates in NATURAL WOOD color. Its generous dimensions that comfortably fit 4 people make it a beautiful and practical addition for a multitude of uses both at home and in business.

DIMENSIONS:
220x36x44.5H cm.
Leg height: 38 cm.
Leg distance: 163-172x24-35 cm.

CONSTRUCTION MATERIALS:
The frame is made of aluminum. Aluminum is a metal with excellent mechanical properties, and it is very resistant to various forms of corrosion and requires minimal maintenance costs. Aluminum can also be recycled indefinitely, maintaining its characteristics without any quality degradation.
The seat is made of polywood. This is a form of plastic lumber that is environmentally friendly and requires little maintenance. Plastic lumber is 100% recyclable and at the same time, it is waterproof and resists all kinds of rot and mold.

MAINTENANCE:
You can wipe all surfaces with a damp cloth, and this is enough to make your furniture look like new again. For persistent stains you can use a mild cleaner. Avoid prolonged exposure of the seat surface to the sun as well as its contact with toxic chemical products.

*The product is delivered unassembled in factory packaging
** The color rendering of the product may differ slightly from its photographic representation on your screen.