Outdoor

HM5896- straw beach umbrella--- Professional beach umbrella made of straw. It follows the classic design which gives a natural look to the space. The shading is of great quality as expected from a straw umbrella. The wooden post is tall and round. The straw top is supported by a metal frame with a ring and 6 spokes, while the characteristic of this umbrella is that it has 3 metal support beams which are attached directly to the wooden pole. A quality proposal that will delight you.

SPECIFICATIONS:
Dimensions: Φ216x270H cm.
Metal thickness: 1.3 mm
Thickness of wooden post: 8 cm.


CONSTRUCTION MATERIAL:
The umbrella is straw while the umbrella pole is made of "wild" pine wood, impregnated, and turned.
Did you know that...: Impregnation in the broadest sense is the coloring of wood (usually varnishes) by the dipping method. The normal impregnation of the wood, however, is done in a furnace under pressure. There, the wood, through the application of a preservative substance, is protected for many years from fungi and insects, as a result of which it acquires a lifespan many times longer than that of non-impregnated wood.
The metal frame is galvanized. This means a zinc coating for oxidation resistance. The service life of the galvanized coating can reach up to 30 years for galvanized of excellent quality, although the installation near the sea reduces this period considerably.

MAINTENANCE:
For the best maintenance of the metal parts of the umbrella, it would be good to clean it daily with a slightly damp cloth to remove excessive salt accumulation. In this way, it will be kept in good condition for many years.

ADVANTAGES:
This umbrella is practical as the straw part is removable and stackable. Beyond that, it offers quality shading while its size and height makes it particularly convenient. Finally, the existence of the struts makes it resistant to time and all you need to do is install it!

The bar stool HM5892.02 for professional use, is exactly what you expect it to be! Modern, comfortable, and stable! The two-tone coloring of the WHITE frame and seat with the BEIGE synthetic RATTAN lining on the back is unique. The back is slightly rounded while the seat, instead of a cushion, sports durable textline fabric. But the arms are what make this stool attractive for any kind of use, while its clean-cut design lines will aesthetically upgrade the space where you will place it and it will catch the eye. Also, the fact that it is stackable makes it very practical since you can store it in the smallest possible space.

DIMENSIONS:

56x58x105 cm.

Seat height: 72 cm.

Height of arms: 91 cm.

Seat dimensions: 40x43.5 cm.

Back dimensions: 48x21 cm.
Aluminum frame: 38x17mm on legs---38x19mm on seat
Aluminum thickness: 1.2 mm


CONSTRUCTION MATERIALS:
The frame of the stool is made of powder coated aluminum. Aluminum is a "green" material that can be recycled indefinitely, maintaining its characteristics without any quality degradation. Aluminum naturally forms a thin oxide layer on the surface in contact with air, which provides very good corrosion protection, even in corrosive environments. This layer can be further strengthened by surface treatment such as powder coating.

Info: Powder coating is a dry coating process used as a metal finish mostly on industrial equipment. Powder coating is applied as dry powder through an electrostatic process, then cured with heat. It is well known for providing high-quality finishes in terms of both functionality and overall look. The powder coating finishes are not only sturdy but flexible as well. It can be used on different surfaces, including metal, concrete, steel, and plastic. It’s suitable for both indoor and outdoor applications, and it’s one of the most cost-effective finish options.

The stool is upholstered with polyester RATTAN. In most garden furniture and outdoor furniture in general, PVC synthetic material is used, i.e., high-quality man-made fibers. This gives the construction exceptional strength and durability in extreme heat or cold conditions.

MAINTENANCE:
Thanks to the durability of both aluminum and polyester RATTAN and textline, the maintenance of the stool is easy. In addition to regular dusting, you can wipe it with a damp cloth. We do NOT use detergents, bleaches, and polishes. If, nevertheless, the use of detergent is necessary, then we use mild soap with warm water. We do NOT use a pressure machine or hose with pressure because it will damage the fibers.

ADVANTAGES:
• Sturdy construction
• Modern design
• Aesthetic superiority with RATTAN and textline and the WHITE aluminum
• Ease of maintenance
• Stackable
• Amazing value for money

The armchair HM5893.03 for business use, is beautiful! Modern, comfortable, and stable! The subtle two-tone coloring of the champagne-colored frame and seat with the BEIGE synthetic RATTAN lining on the back is unique. The back is slightly reclined for more comfort, while the seat, instead of a cushion, sports durable textline fabric. This armchair will aesthetically upgrade the space you put it and will catch the eye thanks to its clean-cut and squared design. Also, the fact that it is stackable makes it very practical since you can store it in the smallest possible space.

DIMENSIONS:
Dimensions: 55.5x58.5x83 cm.
Seat height: 42 cm.
Height of arms: 65 cm.
Seat dimensions: 42x47 cm.
Back dimensions: 49x25 cm.
Aluminum frame: 25x25mm on legs---30x20mm on seat
Aluminum thickness: 1.2 mm


CONSTRUCTION MATERIALS:
The frame of the armchair is made of powder coated aluminum. Aluminum is a "green" material that can be recycled indefinitely, maintaining its characteristics without any quality degradation. Aluminum naturally forms a thin oxide layer on the surface in contact with air, which provides very good corrosion protection, even in corrosive environments. This layer can be further strengthened by surface treatment such as powder coating.

Info: Powder coating is a dry coating process used as a metal finish mostly on industrial equipment. Powder coating is applied as dry powder through an electrostatic process, then cured with heat. It is well known for providing high-quality finishes in terms of both functionality and overall look. The powder coating finishes are not only sturdy but flexible as well. It can be used on different surfaces, including metal, concrete, steel, and plastic. It’s suitable for both indoor and outdoor applications, and it’s one of the most cost-effective finish options.

The armchair is upholstered with polyester RATTAN. In most garden furniture and outdoor furniture in general, PVC synthetic material is used, i.e., high-quality man-made fibers. This gives the construction exceptional strength and durability in extreme heat or cold conditions.

MAINTENANCE:
Thanks to the durability of both aluminum and polyester RATTAN and textline, the maintenance of the armchair is easy. In addition to regular dusting, you can wipe it with a damp cloth. We do NOT use detergents, bleaches, and polishes. If, nevertheless, the use of detergent is necessary, then we use mild soap with warm water. We do NOT use a pressure machine or hose with pressure because it will damage the fibers.

ADVANTAGES:
• Sturdy construction
• Modern design
• Aesthetic superiority with RATTAN and textline and the champagne-colored aluminum
• Ease of maintenance
• Stackable
• Amazing value for money

The HM5856.02 armchair is imposing! Modern, comfortable, and stable! The two-tone coloring of CHARCOAL GREY frame with BEIGE RATTAN-wicker rope on the seat and back is unique. The back is slightly rounded while the seat, instead of a cushion, sports rattan rope weave. This armchair will aesthetically upgrade the space you put it and will catch the eye thanks to its construction materials. Also, the fact that it is stackable makes it very practical since you can store it in the smallest possible space.

DIMENSIONS:
57x63x80H cm.
Seat dimensions: 40x45 cm.
Back height: 47x30 cm.
Seat height: 43 cm.
Leg height: 66 cm.
Aluminum frame: Φ28x1,3mm + Φ25x1.2mm + 30x19x1.2mm


CONSTRUCTION MATERIALS:
The frame of the armchair is made of powder coated aluminum. Aluminum is a "green" material that can be recycled indefinitely, maintaining its characteristics without any quality degradation. Aluminum is naturally corrosion resistant, even in corrosive environments.

Info: Powder coating is a dry coating process used as a metal finish. Powder coating is applied as dry powder through an electrostatic process, then cured with heat.

The armchair is upholstered with polyester RATTAN rope in wicker. Wicker is not a material; it is a method of making furniture mainly for outdoor spaces. It is an ancient technique in which artisans steam the natural or synthetic material and then bend it into the shape they want or weave it. In ΗΜ5856.02 the wickerwork has been made with high quality and durable polyester fibers resistant to extreme hot or cold weather conditions.

MAINTENANCE:
Thanks to the durability of both aluminum and polyester RATTAN rope, the maintenance of the armchair is easy. In addition to regular dusting, you can wipe it with a damp cloth. We do NOT use detergents, bleaches, and polishes. If, nevertheless, the use of detergent is necessary, then we use mild soap with warm water. We do NOT use a pressure machine or hose with pressure because it will damage the fibers.

ADVANTAGES:
• Sturdy construction
• Modern design
• Aesthetic superiority with RATTAN-wicker rope and the charcoal grey aluminum
• Ease of maintenance
• Stackable
• Amazing value for money

The HM5855.02 armchair is gorgeous! Modern, comfortable, and stable! The two-tone coloring of CHARCOAL GREY frame with BEIGE wicker rope upholstery on the seat, back and arms, is unique. The back is tall and hugs the body while the cushion on the seat is comfortable. This armchair will aesthetically upgrade the space you put it and will catch the eye thanks to its construction materials. Also, the fact that it is stackable makes it very practical since you can store it in the smallest possible space.

DIMENSIONS:
56x66x82H cm.
Aluminum frame: Φ25
Aluminum thickness: 1.5mm
Cushion thickness: 5 cm

CONSTRUCTION MATERIALS:
The frame of the armchair is made of powder coated aluminum. Aluminum is a "green" material that can be recycled indefinitely, maintaining its characteristics without any quality degradation. Aluminum naturally forms a thin oxide layer on the surface in contact with air, which provides very good corrosion protection, even in corrosive environments. This layer can be further strengthened by surface treatment such as powder coating.

Info: Powder coating is a dry coating process used as a metal finish mostly on industrial equipment. Powder coating is applied as dry powder through an electrostatic process, then cured with heat. It is well known for providing high-quality finishes in terms of both functionality and overall look. The powder coating finishes are not only sturdy but flexible as well. It can be used on different surfaces, including metal, concrete, steel, and plastic. It’s suitable for both indoor and outdoor applications, and it’s one of the most cost-effective finish options.

The armchair is upholstered with polyester wicker rope. Wicker is not a material; it is a method of making furniture mainly for outdoor spaces. It is an ancient technique in which artisans steam the natural or synthetic material and then bend it into the shape they want or weave it. In ΗΜ5855.02 the wickerwork has been made with high quality and durable polyester fibers resistant to extreme hot or cold weather conditions.

MAINTENANCE:
Thanks to the durability of both aluminum and polyester wicker rope, the maintenance of the armchair is easy. In addition to regular dusting, you can wipe it with a damp cloth. We do NOT use detergents, bleaches, and polishes. If, nevertheless, the use of detergent is necessary, then we use mild soap with warm water. We do NOT use a pressure machine or hose with pressure because it will damage the fibers.

ADVANTAGES:
• Sturdy construction
• Modern design
• Aesthetic superiority with wicker rope upholstery
• Ease of maintenance
•Stackable
• Amazing value for money

The HM5855.01 armchair is gorgeous! Modern, comfortable, and stable! The two-tone coloring of WHITE frame with BEIGE wicker rope upholstery on the seat, back and arms, is unique. The back is tall and hugs the body while the cushion on the seat is comfortable. This armchair will aesthetically upgrade the space you put it and will catch the eye thanks to its construction materials. Also, the fact that it is stackable makes it very practical since you can store it in the smallest possible space.

DIMENSIONS:
56x66x82H cm.
Aluminum frame: Φ25
Aluminum thickness: 1.5mm
Cushion thickness: 5 cm

CONSTRUCTION MATERIALS:
The frame of the armchair is made of powder coated aluminum. Aluminum is a "green" material that can be recycled indefinitely, maintaining its characteristics without any quality degradation. Aluminum naturally forms a thin oxide layer on the surface in contact with air, which provides very good corrosion protection, even in corrosive environments. This layer can be further strengthened by surface treatment such as powder coating.

Info: Powder coating is a dry coating process used as a metal finish mostly on industrial equipment. Powder coating is applied as dry powder through an electrostatic process, then cured with heat. It is well known for providing high-quality finishes in terms of both functionality and overall look. The powder coating finishes are not only sturdy but flexible as well. It can be used on different surfaces, including metal, concrete, steel, and plastic. It’s suitable for both indoor and outdoor applications, and it’s one of the most cost-effective finish options.

The armchair is upholstered with polyester wicker rope. Wicker is not a material; it is a method of making furniture mainly for outdoor spaces. It is an ancient technique in which artisans steam the natural or synthetic material and then bend it into the shape they want or weave it. In ΗΜ5855.01 the wickerwork has been made with high quality and durable polyester fibers resistant to extreme hot or cold weather conditions.

MAINTENANCE:
Thanks to the durability of both aluminum and polyester wicker rope, the maintenance of the armchair is easy. In addition to regular dusting, you can wipe it with a damp cloth. We do NOT use detergents, bleaches, and polishes. If, nevertheless, the use of detergent is necessary, then we use mild soap with warm water. We do NOT use a pressure machine or hose with pressure because it will damage the fibers.

ADVANTAGES:
• Sturdy construction
• Modern design
• Aesthetic superiority with wicker rope upholstery
• Ease of maintenance
• Stackable
• Amazing value for money

Professional table top, which is suitable for contact with food. In general, the material is environmentally friendly. It can be used in cafes, restaurants, and tourist accommodation, either indoors or outdoors.

DIMENSIONS:
120X69cm.
Thickness: 12mm.

CONSTRUCTION MATERIAL:
The surface is made of HPL. This is none other than bakelite also known as laminate which is a coating material made of synthetic resin, durable and hard. Its real name, then, is High Pressure Laminate 'HPL'. Bakelite is boards covered with sheets of synthetic materials that look like wood. As a material it is very economical and has a matte or glossy finish. It is placed on MDF or chipboards with special resins and has a huge variety of colors and imitations of wood or other designs. Its main characteristics are its resistance to impacts, abrasion and stains, its resistance to the creation of bacteria and finally its color stability to sunlight and artificial lighting. It also shows resistance to high temperatures, with excellent resistance to fire, scratches and it is particularly resistant to water.

In case you wish to have the HPL surface pre-drilled by our company, the cost amounts to 4 euros per piece.

Important note**:
Before installing the screws, you should check their size to avoid surface damage.
(If the wrong screws are installed the surface will be damaged as the screws penetrate it. To avoid damage to the product it is recommended to check the screw size before it is installed on the surface, even if the screws are from our company or you buy them on the market.)

The product is of European origin and manufacture.

Βάση τραπεζιού κατασκευασμένη από μέταλλο σε μαύρη απόχρωση.
ΔΙΑΣΤΑΣΕΙΣ ΒΑΣΕΙΣ:110X60X75Υεκ.

Σημαντική Σημείωση

Προσοχή: Οι ξυλόβιδες που πιθανόν να περιέχονται στην συσκευασία για να βιδωθεί το καπάκι
ενδέχεται να μην είναι κατάλληλες για το καπάκι που επιλέγετε.
Ελέγχετε πάντα το ύψος της βίδας πριν βιδώσετε.

Το προϊόν δεν περιλαμβάνει επιφάνεια.

Επιφάνεια HPL (High Pressure Laminated), σε απόχρωση ferndale concrete 140x85 εκ.

Επαγγελματική επιφάνεια τραπεζιού η οποία χαρακτηρίζεται από ανθεκτικότητα στις υψηλές θερμοκρασίες, με εξαιρετική αντίσταση στην φωτιά, στις γρατσουνιές και ιδιαίτερα υψηλή αντοχή στο νερό.

Οι επιφάνειες HPL είναι κατασκευασμένες από πολυμερή υλικά υψηλής τεχνολογίας συμπιεσμένων υπό υψηλή θερμοκρασία και πίεση που προσφέρουν εξαιρετική αντοχή.

Είναι κατάλληλη για επαφή με τρόφιμα και το υλικό της είναι φιλικό προς το περιβάλλον.

Ιδανική για εξωτερική και εσωτερική χρήση. Κατάλληλη για επαγγελματική χρήση σε καφετέριες, εστιατόρια και τουριστικά καταλύματα.

Στη περίπτωση που επιθυμείτε να προ τρυπηθεί η επιφάνεια hpl από την εταιρεία μας, το κόστος ανέρχεται σε 4 ευρώ ανά τεμάχιο.

Σημαντική Σημείωση:
Πριν τοποθετήσετε τις βίδες, θα πρέπει να ελέγξετε το μέγεθός τους, για την αποφυγή φθοράς της επιφάνειας.
(Εάν τοποθετηθούν λανθασμένες βίδες η επιφάνεια θα υποστεί φθορά καθώς οι βίδες θα την διαπεράσουν.
Για την αποφυγή φθοράς του προϊόντος συνιστάτε να ελέγχετε το μέγεθος της βίδας πριν τοποθετηθεί στην επιφάνεια, ακόμα και αν οι βίδες προέρχονται από την εταιρεία μας ή τις αγοράσετε εσείς από το εμπόριο.)

Διαστάσεις: 140x85 εκ.
Πάχος: 12mm.

Το προίον είναι Ευρωπαϊκής προέλευσης και κατασκευής.

Επιφάνεια HPL (High Pressure Laminated), σε απόχρωση ferndale concrete 120x48 εκ.

Επαγγελματική επιφάνεια stand bar η οποία χαρακτηρίζεται από ανθεκτικότητα στις υψηλές θερμοκρασίες, με εξαιρετική αντίσταση στην φωτιά, στις γρατσουνιές και ιδιαίτερα υψηλή αντοχή στο νερό.

Οι επιφάνειες HPL είναι κατασκευασμένες από πολυμερή υλικά υψηλής τεχνολογίας συμπιεσμένων υπό υψηλή θερμοκρασία και πίεση που προσφέρουν εξαιρετική αντοχή.

Είναι κατάλληλη για επαφή με τρόφιμα και το υλικό της είναι φιλικό προς το περιβάλλον.

Ιδανική για εξωτερική και εσωτερική χρήση. Κατάλληλη για επαγγελματική χρήση σε καφετέριες, εστιατόρια και τουριστικά καταλύματα.

Στη περίπτωση που επιθυμείτε να προ τρυπηθεί η επιφάνεια hpl από την εταιρεία μας, το κόστος ανέρχεται σε 4 ευρώ ανά τεμάχιο.

Σημαντική Σημείωση:
Πριν τοποθετήσετε τις βίδες, θα πρέπει να ελέγξετε το μέγεθός τους, για την αποφυγή φθοράς της επιφάνειας.
(Εάν τοποθετηθούν λανθασμένες βίδες η επιφάνεια θα υποστεί φθορά καθώς οι βίδες θα την διαπεράσουν.
Για την αποφυγή φθοράς του προϊόντος συνιστάτε να ελέγχετε το μέγεθος της βίδας πριν τοποθετηθεί στην επιφάνεια, ακόμα και αν οι βίδες προέρχονται από την εταιρεία μας ή τις αγοράσετε εσείς από το εμπόριο.)

Διαστάσεις: 120x48 εκ.
Πάχος: 12mm.

Το προίον είναι Ευρωπαϊκής προέλευσης και κατασκευής.